Short answer: The Airman Certification Standards (ACS) is the FAA document that defines what you must know, what risks you must manage and what you must be able to do to earn a pilot certificate or rating. Examiners build their plan of action for your checkride directly from it, and your knowledge test results are coded to it. If you study from the ACS task by task and practice to its tolerances, the practical test holds very few surprises.
Key Takeaways
- The ACS replaced the Practical Test Standards (PTS) for most airplane certificates and ratings.
- Every task has knowledge (K), risk management (R) and skill (S) elements.
- Codes on your knowledge test report point to specific ACS elements, and the examiner must re-evaluate them.
- Skill elements include tolerances. Practice to them, not just “close enough.”
- The ACS is free from the FAA, and you should always use the current edition.
What Is the ACS, and How Is It Different From the PTS?
The older Practical Test Standards listed maneuvers and the tolerances for flying them. The ACS keeps those flight standards, adds knowledge and risk management elements to each task, and ties the whole system to the knowledge test. The goal is to test whether you can apply knowledge and make sound decisions, not just recite facts and fly maneuvers. ACS documents exist for the private pilot, instrument rating, commercial pilot, ATP and flight instructor certificates, among others.
How Is the ACS Organized?
| Level | What it means | Example (Private Pilot) |
|---|---|---|
| Area of Operation | A major phase of the test | IV. Takeoffs, Landings, and Go-Arounds |
| Task | A specific maneuver or topic | Short-Field Approach and Landing |
| Knowledge (K) | What you must understand | Effects of wind and density altitude on landing distance |
| Risk Management (R) | Hazards you must identify and mitigate | Selecting a touchdown point that leaves a margin |
| Skills (S) | What you must demonstrate, with tolerances | Touch down at or within 200 feet beyond the selected point |
The Private Pilot Airplane ACS covers areas such as preflight preparation, preflight procedures, airport operations, takeoffs and landings, performance and ground reference maneuvers, navigation, slow flight and stalls, basic instrument maneuvers, emergency operations, night operations and postflight procedures.
How to Read an ACS Code
Each element has a code. For example, a code like PA.I.D.K2 breaks down as:
- PA: Private Pilot, Airplane
- I: Area of Operation I (Preflight Preparation)
- D: Task D within that area
- K2: Knowledge element 2
When you pass the knowledge test, your Airman Knowledge Test Report lists codes for the topics you missed. Look up each one in the ACS, study it, and have your instructor sign off that you’ve reviewed those areas. The examiner is required to re-evaluate them during the practical test.
The Tolerances That Matter Most
| Maneuver (Private Airplane, examples) | Typical tolerances |
|---|---|
| Steep turns | ±100 ft altitude, ±10 knots, ±5° bank, roll out ±10° of heading |
| Short-field landing | Touch down at or within 200 ft beyond the selected point |
| Slow flight | ±100 ft, ±10° heading, +10/−0 knots |
| Navigation and cruise | Altitude ±200 ft, heading ±15° |
These are illustrative. Always use the exact figures in the current ACS for your certificate, since instrument and commercial standards are tighter.
A Study Plan Built on the ACS
- Week by week, task by task. Work through one area of operation at a time. For every K and R element, explain it out loud as if teaching it.
- Fly to the numbers. On every practice flight, grade yourself against the ACS tolerances, not against your last flight.
- Practice scenarios. Risk management elements are often tested as “what would you do if…” questions. Practice answering with the hazard, the reference, the decision and the margin.
- Review your test codes. Turn every missed knowledge test code into a flash card.
- Read the appendices. They explain test procedures, required equipment, use of checklists and distractions, and when a test can be discontinued.
- Fly a mock checkride. Ask a different instructor to run a full mock test straight from the ACS.
How Examiners Use the ACS
Examiners prepare a plan of action covering every required area of operation, the tasks they’ve selected and your knowledge test codes. Many tasks are tested through scenarios that blend several elements, such as a diversion that tests navigation, weather and fuel planning at once. If you perform a task unsatisfactorily, the test may be discontinued or completed with a notice of disapproval. Ask your examiner how they handle retests and credit for completed areas.
Want to know what checkride day looks like? Read what to expect on a private pilot checkride and why not knowing one answer on the oral doesn’t mean you fail.
The Bottom Line
The ACS is the closest thing to an answer key that exists for a checkride. Work through it with your instructor, review your knowledge test codes, fly to the published tolerances and practice scenario answers. Done that way, the practical test becomes a confirmation of what you already know.
Frequently Asked Questions
Is the ACS the same as the PTS?
No. The ACS replaced the PTS for most airplane certificates and adds knowledge and risk management elements to the skill standards.
Where do I get the ACS?
It’s free on the FAA’s Airman Certification Standards page. Download the current version for your certificate.
Will the examiner ask about my missed knowledge test questions?
Yes. The codes on your test report point to ACS elements the examiner must re-evaluate.
Do I have to fly every task in the ACS?
Every area of operation must be evaluated. Within some areas, the examiner selects which tasks to test.
What happens if I’m outside a tolerance?
Brief, minor excursions that you promptly correct may be acceptable. Consistently exceeding tolerances or failing to correct is unsatisfactory.
Sources: FAA — Airman Certification Standards; FAA — Airman Testing
