Left Turns in the Traffic Pattern: What 14 CFR 91.126 Requires

pexels-photo-11640346.jpeg Photo by Skilltone on Pexels.com

Short answer: Under 14 CFR 91.126(b), when approaching to land at an airport without an operating control tower in Class G airspace, airplane pilots must make all turns to the left unless the airport displays approved light signals or visual markings indicating that turns should be made to the right. Section 91.127 applies the same rule in Class E airspace. Right-traffic runways are shown on segmented circles and in the Chart Supplement.

Key Points

SituationRule
Non-towered airport, no right-traffic indicationLeft turns required when approaching to land
Right traffic shown on the segmented circle or in the Chart SupplementRight turns
Towered airportFollow ATC instructions
HelicoptersAvoid the flow of fixed-wing traffic

What About Straight-In Approaches?

The FAA’s recommended pattern entry is a 45° entry to downwind, and AC 90-66 explains non-towered airport procedures. Straight-in approaches aren’t prohibited, but pilots doing them must not disrupt traffic already in the pattern and must give way as required by the right-of-way rules. The FAA Chief Counsel has also addressed how the left-turn rule applies to circling approaches and other situations.

The Bottom Line

At non-towered airports, plan on left traffic unless the airport tells you otherwise. Check the Chart Supplement and segmented circle every time.

Frequently Asked Questions

How do I know if a runway uses right traffic?
Check the Chart Supplement, the sectional’s airport data and the segmented circle.

Are straight-in approaches illegal?
No, but they must not disrupt the established traffic flow.

Does this apply at towered airports?
No. Follow ATC instructions.

Sources: 14 CFR 91.126; 14 CFR 91.127; FAA — AC 90-66, Non-Towered Airport Flight Operations

Leave a Reply